Switches

Photon G24S-4X

Photon G24S‑4X

An all-fiber Layer 3 switch with 20× 1G SFP, 4× GE/SFP combo ports and 4× 10G SFP+ uplinks — for fiber distribution across buildings and campuses.

20× 1G SFP

4× GE combo

4× 10G SFP+

128 Gbps

Layer 3

Lumira Photon G24S-4X Layer 3 managed switch

Key features

Built for fiber distribution

20 fiber ports

20× 1000Base-X SFP ports for fiber runs to buildings, floors and remote closets.

4 combo ports

4× GE/SFP combo ports — copper or fiber on each port, as the link needs.

10G SFP+ uplinks

4× SFP+ ports that take 10G or 1G modules, for fiber uplinks to your core or aggregation layer.

Line-rate switching

128 Gbps switching capacity and 95.24 Mpps forwarding, with a 16K MAC table and 12 Mbit packet buffer.

Layer 3 routing

Static routes plus RIP and OSPF, DHCP server and relay, on an IPv4/IPv6 dual-stack platform.

Optional redundant power

Order with dual power supplies, AC + AC or AC + DC, to keep the switch running if one feed fails.

Interfaces

What’s on the front panel

Every port on the Photon G24S-4X, from fiber to management.

20

1G SFP

1000Base-X fiber ports

4

GE/SFP combo

Copper or fiber, per port

4

10G SFP+

1G SFP / 10G SFP+ fiber uplinks

1

Console

Serial port for out-of-band CLI

Specifications

Technical specifications

Full hardware and software specifications for the Photon G24S-4X.

Hardware

Ethernet ports

20× 1000Base-X SFP + 4× GE/SFP combo

Uplink ports

4× 1G SFP / 10G SFP+

PoE

Not supported

Management

Console port

Memory

512 MB RAM, 32 MB flash

Jumbo frames

9K

Performance

Switching capacity

128 Gbps

Forwarding rate

95.24 Mpps

MAC table

16K

Packet buffer

12 Mbit

Routing table

512

ARP table

2K

Multicast groups

1K

Software

Layer 2

4K VLAN, QinQ, STP/RSTP/MSTP, LACP

QoS

SP, WRR, SP+WRR; ACL classification

Layer 3

Static routes, RIP, OSPF; IPv4/IPv6 dual stack

Resilience

FlexLink, LACP, loop detection

Stacking

Up to 8 units, single IP

Physical

Form factor

19-inch 1U

Dimensions

440 × 210 × 44 mm

Weight

2.9 kg

Power supply

AC 100–240 V; optional dual AC + AC or AC + DC (−40 ~ −60 V)

Max power

≤ 58 W (idle ≤ 13 W)

Fans

3

Operating temp

−10 ~ 50 °C

Humidity

5 – 95% non-condensing

— Contact us for this specification. Specifications are subject to change without notice.

Specifications are subject to change without notice.

Planning a network?

Tell us your sites, port counts and PoE needs — we’ll recommend the right models and put together a quote.